ChemSplash® 1 | 7019YT

Full Short Description
Chemical Splash Coverall with Hood & Boot, Elastic Wrist & Ankle, Taped Seams
Case UOM
per case
Find a Distributor
These durable and disposable coveralls protect against chemical splashes and toxic particles. The proprietary, hybrid membrane fabric offers a high moisture vapor transfer rate (MVTR), so you stay cool as you put in a hard day’s work. A storm flap over the zipper with pressure-sensitive tape helps prevent hazardous liquids from seeping through exposed zipper seams. A high contrast red stripe lets you quickly distinguish this taped-seam garment from coveralls made with serged seams. For added comfort, a gusted crotch, elastic back, and seamless shoulders help prevent tears and allow you to move more freely as you work. With an attached hood and boots, you’re protected from head to toe. Possible applications include manufacturing, emergency response, environmental cleanup, and more.
  • Feature 1
    Roomy, seamless shoulder area resists tears and provides more protection in key exposure area
  • Feature 2
    Wider, gusseted crotch gives wearer more room to move in all directions without ripping fabric
  • Feature 3
    Elastic back stretches with wearer for more comfort and better tear resistance
  • Feature 4
    Storm flap over zipper with pressure sensitive tape adds an extra layer of protection
  • Feature 5
    High moisture vapor transfer rate improves wearer comfort
Pack Type Bulk
Sterile No
Color Yellow
Collar / Hood Type Attached Hood
Ankle Style Attached Boot
Cuff Style Elastic Wrist
Back Style Elastic Back
Material Proprietary Laminated Nonwoven
Seam Style Taped Seams
Closure Type Zipper
Country of Origin China
Physical Properties
Test Conducted Test Method Test Result
Tensile Strength — Machine Direction ISO 13934-1 48.3 N
Trapezoidal Tear — Cross Direction ISO 9073-4 108.1 N
Bursting Strength — Machine Direction ISO 13938-1 40.7 pa
Puncture — Cross Direction EN 863 6.95 N
Antistatic EN 1149-1 <5x109 ohm
Abrasion Resistance EN 530 Class 2 ( > 100 cycles )
Hydrostatic Resistance ISO 811 226 cm
Moisture Vapor Transmission Rate ASTM E96 > 3000 gm/m2/24hr
Chemical Properties
AgentTest MethodPenetrationRepellency
n-Heptane 99%ISO 6530 / EN 368Class 3Class 1
Dichloromethane 99.9%ISO 6530 / EN 368Class 3Class 1
Toluene 99.9%ISO 6530 / EN 368Class 3Class 1
Isopropanol 99.5%ISO 6530 / EN 368Class 3Class 2
Sodium Hydroxide 50%ISO 6530 / EN 368Class 3Class 3
Hydrochloric Acid 36-37%ISO 6530 / EN 368Class 3Class 3
Hydrofluoric Acid 48-50%ISO 6530 / EN 368Class 3Class 3
JP8 Jet FuelISO 6530 / EN 368Class 3Class 2
Sulphuric Acid 96%ISO 6530 / EN 368Class 3Class 3
Synthetic BloodASTM F1670 Pass
Additional Properties & Testing
Category IIIProducts which are worn or held in order to protect against any hazard which may be harmful and life threatening.
TYPE 5 BS EN ISO 13982-1: 2004Dry particle suits – Suits for protection against hazardous dusts and any dry particles.
TYPE 6 BS EN 13034: 2005Reduced spray suits – Suits for protection against light spray and splashes of liquid chemicals where there is no directional spray or buildup of liquid on the suit, but there may be a fine mist of droplets in the atmosphere.
EN 1149-5: 2008Protective Clothing - Electrostatic Properties for Surface Resistivity; material and design requirements for electrostatic dissipative protective clothing; garments that protect against electrostatic discharge in explosion risk environments.
Copyright © 2023 International Enviroguard.