ChemSplash® 1 | 7012YT
- Feature 1Roomy, seamless shoulder area resists tears and provides more protection in key exposure area
- Feature 2Wider, gusseted crotch gives wearer more room to move in all directions without ripping fabric
- Feature 3Elastic back stretches with wearer for more comfort and better tear resistance
- Feature 4Storm flap over zipper with pressure sensitive tape adds an extra layer of protection
- Feature 5High moisture vapor transfer rate improves wearer comfort
Pack Type | Bulk |
---|---|
Sterile | No |
Color | Yellow |
Collar / Hood Type | Standard Collar |
Ankle Style | Open Ankle |
Cuff Style | Elastic Wrist |
Back Style | Elastic Back |
Material | Proprietary Laminated Nonwoven |
Seam Style | Taped Seams |
Closure Type | Zipper |
Country of Origin | China |
Test Conducted | Test Method | Test Result |
---|---|---|
Tensile Strength - Machine Direction | ISO 13934-1 | 48.3 N |
Trapezoidal Tear - Cross Direction | ISO 9073-4 | 108.1 N |
Bursting Strength - Machine Direction | ISO 13938-1 | 40.7 pa |
Puncture - Cross Direction | EN 863 | 6.95 N |
Antistatic | EN 1149-1 | Passed ( < 5x109 ohm ) |
Flammability | EN 1146 | Passed |
Abrasion resistance | EN 530 | Class 2 ( > 100 cycles ) |
Anti Chemical penetration | EN 374-3 | Passed |
Hydrostatic resistance | ISO 811 | 226 cm |
Moisture Vapor Transmission Rate | ASTM E96 | > 3000 gm/m2/24hr |
Category III
Products which are worn or held in order to protect against any hazard which may be harmful and life threatening.
TYPE 5 BS EN ISO 13982-1: 2004
Dry particle suits – Suits for protection against hazardous dusts and any dry particles.
Anti-static EN 1149-1
Maximum surface resistivity of 5x1010 ohms.
TYPE 6 BS EN 13034: 2005
Reduced spray suits – Suits for protection against light spray and splashes of liquid chemicals where there is no directional spray or buildup of liquid on the suit, but there may be a fine mist of droplets in the atmosphere.
EN 1149-5: 2008
Protectice Clothing - Electrostatic Properties for Surface Resistivity; material and design requirements for electrostatic dissipative protective clothing; garments that protect against electrostatic discharge in explosion risk environments.
Agent | Test Method | Penetration | Repellency |
---|---|---|---|
n-Heptane 99% | ISO 6530 / EN 368 | Class 3 | Class 1 |
Dichloromethane 99.9% | ISO 6530 / EN 368 | Class 3 | Class 1 |
Toluene 99.9% | ISO 6530 / EN 368 | Class 3 | Class 1 |
Isopropanol 99.5% | ISO 6530 / EN 368 | Class 3 | Class 2 |
Sodium Hydroxide 50% | ISO 6530 / EN 368 | Class 3 | Class 3 |
Hydrochloric Acid 36-37% | ISO 6530 / EN 368 | Class 3 | Class 3 |
Hydrofluoric Acid 48-50% | ISO 6530 / EN 368 | Class 3 | Class 3 |
JP8 Jet Fuel | ISO 6530 / EN 368 | Class 3 | Class 2 |
Sulphuric Acid 96% | ISO 6530 / EN 368 | Class 3 | Class 3 |
Synthetic Blood | ASTM F1670 | Pass | |
Anti synthetic blood | ASTM F1670 | Pass |