facebookImg

ChemSplash® 1 | 702846Y

Full Short Description
28" x 46" Chemical Splash Apron with Tie Strings
CASE QTY
100
Case UOM
per case
Find a Distributor
This chemical-resistant apron provides frontal protection against chemical splashes and toxic particles. The longer length ensures your chest and knees are protected from light splashes and sprays. Our proprietary, hybrid membrane fabric helps keep you cool as you work long hours in order to prevent heat stress. Tie strings are secured in the back to keep them out of the way while you work. They also allow you to adjust the fit of the apron to your size for added comfort.
  • Feature 1
    Comfortable bib-style design
  • Feature 2
    Tie strings secure apron
 
Details
Size Universal
Pack Type Bulk
Sterile No
Color Yellow
Material Proprietary Laminated Nonwoven
Seam Style Raw Edge
Closure Type Tie
Country of Origin China
UPC 813383013570
Physical Properties
Test Conducted Test Method Test Result
Tensile Strength — Machine Direction ISO 13934-1 48.3 N
Trapezoidal Tear — Cross Direction ISO 9073-4 108.1 N
Bursting Strength — Machine Direction ISO 13938-1 40.7 pa
Puncture — Cross Direction EN 863 6.95 N
Antistatic EN 1149-1 <5x109 ohm
Abrasion Resistance EN 530 Class 2 ( > 100 cycles )
Hydrostatic Resistance ISO 811 226 cm
Moisture Vapor Transmission Rate ASTM E96 > 3000 gm/m2/24hr
Chemical Properties
AgentTest MethodPenetrationRepellency
n-Heptane 99%ISO 6530 / EN 368Class 3Class 1
Dichloromethane 99.9%ISO 6530 / EN 368Class 3Class 1
Toluene 99.9%ISO 6530 / EN 368Class 3Class 1
Isopropanol 99.5%ISO 6530 / EN 368Class 3Class 2
Sodium Hydroxide 50%ISO 6530 / EN 368Class 3Class 3
Hydrochloric Acid 36-37%ISO 6530 / EN 368Class 3Class 3
Hydrofluoric Acid 48-50%ISO 6530 / EN 368Class 3Class 3
JP8 Jet FuelISO 6530 / EN 368Class 3Class 2
Sulphuric Acid 96%ISO 6530 / EN 368Class 3Class 3
Synthetic BloodASTM F1670 Pass
Additional Properties & Testing
Category IIIProducts which are worn or held in order to protect against any hazard which may be harmful and life threatening.
TYPE 5 BS EN ISO 13982-1: 2004Dry particle suits – Suits for protection against hazardous dusts and any dry particles.
TYPE 6 BS EN 13034: 2005Reduced spray suits – Suits for protection against light spray and splashes of liquid chemicals where there is no directional spray or buildup of liquid on the suit, but there may be a fine mist of droplets in the atmosphere.
EN 1149-5: 2008Protectice Clothing - Electrostatic Properties for Surface Resistivity; material and design requirements for electrostatic dissipative protective clothing; garments that protect against electrostatic discharge in explosion risk environments.
Copyright © 2023 International Enviroguard.